A compressor is one of the primary parts of your heating and air conditioning system. It is used for pumping the refrigerant between the evaporator and the condenser. However, the compressor is prone to many issues, and one of them is compressor overload. This problem can have a serious bearing not only on the efficient functioning of the HVAC system but also on the system’s overall energy efficiency and total operational cost. Hence, homeowners must prevent HVAC compressor overloads, ensuring that their HVAC systems run effectively and efficiently. One of the most effective measures you can undertake as a Kingman, AZ homeowner is having a routine maintenance service done by a reliable heating and air conditioner repair professional. Below are some maintenance tasks the professional might undertake to ensure that your compressor is manageable.
When was the last time you had your HVAC system cleaned? Keeping the heating and air conditioning system clear of debris is critical to preventing compressor overloads. In its day-to-day operations, dirt, dust, and other debris accumulate in the HVAC system, preventing a seamless airflow. This makes the HVAC system work harder than it should. As a result, the compressor is overworked, making it overheat or even potentially fail. One of the main causes of compressor overloads is heating.
The combination of dirt and debris impedes air flow, making the compressor work harder than it should. Hence, all these factors combined result in compressor overloads. As a result, you should have an air conditioner repair technician clean the evaporator coils, remove debris from the condenser, and clean or replace the air filters and even air ducts. This will eliminate any strain on your AC that could result in compressor overloads. Additionally, it ensures that your HVAC system can serve your home longer while eliminating any need for air conditioner repairs.
One of the leading causes of HVAC compressor overloads is that some homeowners need to consider the size of the load (space being heated or cooled) when having a heating and AC repair technician install HVAC systems. However, measuring the load and installing an HVAC system of the right size is critical to preventing compressor overloads. If you install a too-small HVAC system, then it will be forced to work harder to heat or cool your Kingman, AZ home.
This means that it will be using more energy than required and running for long hours to meet the thermostat set temperatures. As a result, your system will start to wear out and require frequent air conditioner repairs. In contrast, a too-large HVAC system will be short cycling, resulting in a strain on the compressor. Short cycling is the leading cause of many problems that require a reliable, professional air conditioner repair technician’s attention. Right-sized HVAC systems will run efficiently, and the compressor will not have to put extra effort into reaching those thermostats set temperatures. This will save energy and prolong your HVAC system’s lifespan, averting any need for frequent, expensive repairs.
Enlisting a heating and air conditioner repair specialist to install temperature sensors on your HVAC system can be essential in preventing compressor overloads. This is because they will provide real-time data on the system’s temperatures. You can then use this data to monitor your HVAC system and adjust temperatures where needed to ensure that your compressor doesn’t overheat. This way, the system will automatically shut off or even reduce the load on your unit’s compressor whenever the temperatures exceed a certain threshold.
This will prevent any damage and also prolong the lifespan of your equipment. Temperature sensors can also detect other underlying problems that might result in compressor overloads, like malfunctioning thermostats and blocked air filters. By catching these problems early, you will be able to address them before they precipitate damage that will need the attention of an air conditioner repair pro. The HVAC repair technician can also rely on the temperature sensor readings when they come for a routine maintenance service to root out any underlying problem and address it.
An overcharged or undercharged HVAC system also will undoubtedly experience compressor overloads. The refrigerant is the component of your HVAC system that facilitates heat exchange to ensure that your home is cooled or heated effectively. Whenever the refrigerant levels in your HVAC system are too low, the compressor is forced to work harder to pump the refrigerant via the system. This makes the compressor overheat or even potentially damaged. As a result, the system loses efficiency, resulting in higher energy costs. Additionally, low refrigerant levels will freeze the evaporator coils, further restricting the airflow over the coils and making the compressor strain.
On the other hand, if the system is overcharged, it will experience a pressure imbalance, resulting in a strain on the compressor. Hence, you must ensure that a heating and air conditioner repair technician checks the refrigerant levels when they come for a routine maintenance visit. If the refrigerant levels are low because of a leakage, the professional should be able to refill it to the recommended levels. However, you must hire experienced and licensed technicians for this job. Hiring an inexperienced air conditioner repair technician or doing it yourself might result in a refrigerant overcharge or even refilling it with another type of refrigerant, making the problem even worse. Remember, the refrigerant is the main component of heat exchange. Any problem with it will render the system useless and unable to cool your Kingman, AZ home properly.
Have you noticed that the compressor in your HVAC system is showing signs of being overloaded? You should immediately have it looked at by a professional. At Pitzer’s One Hour Air Conditioning & Heating of Mohave County, we can undertake various measures to ensure your compressor works effectively. Contact us today for HVAC repair, maintenance, or even duct cleaning.